home page T8 LED lighting retrofit lamps
LED Information
LED Information
About LED T8 Lamps welcome to T8 LED org

LEDs differ from traditional light sources in the way they produce light. In an incandescent lamp, a tungsten filament is heated by electric current until it glows or emits light.

In a fluorescent lamp, an electric arc excites mercury atoms, which emit ultraviolet (UV) radiation. After striking the phosphor coating on the inside of glass tubes, most of the UV radiation is converted and emitted as visible light.

An LED, in contrast, is a semiconductor diode. It consists of a chip of semiconducting material treated to create a structure called a p-n (positive-negative) junction. When connected to a power source, current flows from the p-side or anode to the n-side, or cathode, but not in the reverse direction. Charge-carriers (electrons and electron holes) flow into the junction from electrodes. When an electron meets a hole, it falls into a lower energy level, and releases energy.

Ansi Kelvin color chart
1) Can be directly placed in conventional T8 fluorescent brackets

2) Color temperature: 5500K~6000K, 4000K~4500K, 2800K~3300K

3) High performance SMD led:low light degradation,up to 75% lumen maintenance after 50.000 hours operating

5) Anodized aluminum back housing

6) Plastic end caps ensure to pass 4000V HI-POT test

7) Unique thermal management: Aluminum back casing dissipates the inside heat efficiently

8) High power factor:0.95
LED T8 Box for shipping LED Services

Contractor Direct
Full service Lighting |

LED Support
Home | About us | Info | Special Products & Offers | Contacts
Copyright © 2013 | T8 LED Lighting. Designed by AvantiDesigns

Valid HTML 4.01 Transitional